The successful manned launch and recovery of Shenzhou 9 attracted global attention. Of course, the female aerospace hero Liu Yang received the most attention in the incident, but there are many, many unsung heroes behind the scenes who actually support my country's aerospace industry. One of the difficulties in the development of the aerospace industry is the quality of the components in the spacecraft under unconventional conditions such as very harsh temperatures, space rays and huge gravitational acceleration, that is, whether the reliability of electronic products is guaranteed. As we all know, in the past when testing equipment was insufficient, components for some military and even aerospace products were mainly selected through manual screening.
The disadvantages of manual screening are obvious. On the one hand, the product cost is high, and on the other hand, the reliability is not high enough. With the development of China's domestic components, many of these companies have integrated military and civilian products. Therefore, it is necessary for domestic component companies to have a more comprehensive knowledge of reliability testing and failure analysis. Xi'an Semipower Laboratory, China's first national-level power device laboratory, recently held the first series of semiconductor power device testing and reliability technology training in Xi'an, making a great contribution to cultivating talents for the industry. The following is an exclusive interview conducted by this publication with Luo Yi, general manager of Xi'an Semipower Laboratory.
Q: What kind of laboratory is Xi'an Semipower Laboratory?
Luo Yi: The Xi'an power device laboratory invested and constructed by our company has completed the first and second phases of investment of 20 million yuan, and the equipment is basically in place. The laboratory opened on November 16, 2011, and since it was put into use, it has been reviewed and recognized as a municipal and provincial key enterprise engineering technology center by the Xi'an Municipal Development and Reform Commission and the Shaanxi Provincial Development and Reform Commission, and as a municipal engineering demonstration center by the Xi'an Municipal Industry and Information Technology Commission. . Our laboratory has cooperated with the US STI (the leader in static parameter testing equipment and a participant in the formulation of US military standards), ITC (the leader in avalanche testing and dynamic testing in the industry and the US military standard setter) and Qualmark Company (the US military leader in reliability testing). Providers of solutions and equipment in the aerospace field) have established cooperative laboratory relationships.
Q: What is the theme of Semipower’s semiconductor power device testing and reliability technical training? Training time and place? What is the specific method? Where do the training experts invited for event training come from?
Luo Yi: In order to promote our cooperation with relevant brother units, provide a platform for joint learning and discussion between brother units, and also hope to provide everyone with an opportunity to learn and communicate with foreign companies, our company Xi'an Power Devices From June 12 to 15, the laboratory collaborated with relevant technical directors and technical leaders of foreign cooperative laboratories to organize a series of semiconductor power device testing and reliability technology training.
This intensive training will be conducted by equipment developers on DC parameter testing technology and parameter analysis of high-power devices, avalanche testing technology and parameter analysis, dynamic parameter testing technology and analysis of devices, steady-state thermal resistance testing technology of devices, and device reliability Theoretical and practical issues in environmental testing are provided with corresponding technical training and in-depth discussions with researchers and engineers in the industry, and on-site explanations and question answering are provided based on the STI, ITC, AnalysisTECH and Votsch equipment in our experimental center.
Q: What is the background and purpose of this training conducted by Semipower Lab? What achievements have been achieved? What help does it provide to Chinese semiconductor manufacturers and complete system manufacturers? Where do the engineers who receive training mainly come from?
Luo Yi: The semiconductor power device testing technology training meeting organized by Xi'an Semipower was officially launched on June 13, 2012, and successfully concluded on the 15th, lasting three days. Six foreign technical experts and nearly 40 technical elites from 13 well-known domestic companies in the semiconductor industry participated in this training, including Jiangsu Changdian Technology Co., Ltd., Tianshui Huatian Microelectronics Co., Ltd., and Hangzhou Silan Microelectronics Co., Ltd. Co., Ltd., Shanghai Belling Co., Ltd., Wuxi China Resources Shanghai Semiconductor Co., Ltd., China Zhenhua Electronics Group, Yude Technology (Chongqing) Co., Ltd., Shantou Huashan Electronic Devices Co., Ltd., Guangzhou Huawei Electronics Co., Ltd., Jilin Hua Microelectronics Co., Ltd., Guangzhou Youyi Electronic Technology Co., Ltd., Shanghai Huahong NEC Electronics Co., Ltd., Keda Semiconductor Co., Ltd., Fujian Fushun Semiconductor Manufacturing Co., Ltd., Shenzhen Southern Xinyuan Electronic Technology Co., Ltd. (in no particular order) .
At the same time, we witnessed the "New Product and Technology Lecture Project Launching Ceremony" organized by Semipower and held at the Xi'an Science and Technology Market on the morning of June 14th, marking the beginning of a new chapter in school-enterprise cooperation. Global Sources eMedia, Science and Technology Market, Xi'an Jiaotong University, Xi'an University of Technology, Xi'an University of Electronic Science and Technology, Northwestern Polytechnical University, Northwest University, Xi'an Institute of Posts and Telecommunications, and Xi'an University of Science and Technology reported on the launch ceremony. Here, I would like to express my gratitude again to the experts, engineers and related media who participated in this training and project launch ceremony.
This lecture was organized by Semipower and delivered by technical experts from well-known companies in the international integrated circuit industry. It aims to improve the industry's packaging and testing levels and meet the market's growing demand for higher integration and reliability of power platforms.
During the training, Mr. Xu Zhongliang, General Manager of Votsch China, Mr. John Bailey, President of American STI Company, Mr. Bryan Lammers, Technical Director of STI Company, Mr. Liang Wen, Technical Consultant of ITC, Mr. Cai Rongyuan, General Manager of Asia Region of Analysis Tech Inc, and Mr. Cai Rongyuan, General Manager of Asia of Analysis Tech Inc., Mr. Bryan Lammers, Technical Director of STI Company, Six international technical experts including Mr. Kasim Altin, senior engineer of technical support and application, focused on topics such as reliability environmental testing technology, DC testing technology, avalanche testing technology, dynamic parameters, thermal resistance testing technology and ultrasonic scanning mirror measurement technology of power devices. A comprehensive and in-depth explanation was given. Engineers attending the meeting agreed that this training is very necessary and timely. The training content has a wide range of applications and is highly practical. It largely meets the testing-related needs of various enterprises and plays a guiding role in future work.
Through this training meeting, Xi'an Semipower has further improved and improved its own testing technology level, so that our company can provide better and higher-quality services to various semiconductor companies in the future. Through this training session, we have a more comprehensive understanding of the technical needs of various companies in packaging and testing. In the future, Semipower will give full play to its resource advantages, more closely integrate the needs of companies, and invite famous domestic and foreign technical experts to improve the overall industry. Contribute more to your technical level. We also welcome companies to inform Semipower of their difficult-to-overcome technical problems. Semipower will use the rich intellectual resources of universities to strive to solve technical problems for companies quickly and effectively.
Semipower's training is focused on original chip manufacturing and packaging and testing factories. It is the first gathering of industry engineers organized by Semipower Electronics Xi'an Experimental Center since its establishment. This training is intended to unify engineers' understanding of product quality control such as parameter testing, reliability testing and failure analysis of semiconductor discrete devices through explanations and on-site operations by original engineers of world-class testing equipment, so that original chips and Engineers in packaging factories and engineers in design companies have a consistent understanding of the quality control of the same products. Through the interaction between teaching experts and engineers, engineers from manufacturers can learn more testing skills and analysis methods, and at the same time, engineers can also improve their professional skills. friendship between.
Q: What is the feedback from both sides of the training? What follow-up training content will be available in the future? Will there be any improvement in the method?
Luo Yi: Both Semipower and the engineers who participated in the training believe that this training was very rewarding. The engineers hope to continue to hold such training in the future to strengthen exchanges between engineers in the industry.
Semipower will hold similar trainings from time to time in the future. Due to the rapid development of semiconductor power devices, the corresponding test methods and test equipment are also constantly updated. Semipower will provide training for the testing of a certain type of power devices or new testing equipment. The training is The topics will become more and more professional and the level will become higher and higher. We hope to pass the gradually refined training and strengthen the testing and analysis capabilities of the training engineers, so that our partners can improve the quality control methods in the product manufacturing process. and technology are becoming more and more mature, thereby contributing to improving the overall quality of domestic brands of semiconductor power devices.
Postscript: There is a rumor in the industry that the product qualification rate of some component manufacturers is unstable, and their sales departments deal with customers by providing more products than ordered, instead of finding ways to improve quality. The author interacted with Wu Yeqing, an expert blogger on electronic reliability analysis in Electronic Engineering. He believes that reliability test analysis has not been generally studied as an academic discipline in China. "Good people don't want to do it, but others can't do it." This may be a common problem in the industry, but on the other hand, it may be limited by equipment conditions. Through similar training activities held by Xi'an Semipower, engineers and even college students are trained, and the quality of domestic component products will definitely be improved.
This article is from the August 2012 issue of "Electronic Engineering Issue"